21 Mar 2022
Nobody likes a blocked sink or toilet – but follow our simple steps, and your pipes should be flowing in no time.
What you will need
- Plunger
- Gloves
- Drain cleaner
Step one: For most blockages, the first step to do is to get a plunger. Plungers can fix most clogged sinks, drains and toilets and one can easily be bought for under £10.
Step two: Be sure to wear rubber gloves as things can get messy.
Step three: Make your first plunge a gentle one, making sure the plunger is full of air. A hard thrust will force the air back around the seal and blow water all over the bathroom and you.
Step four: Once you force out the air, repeat the motion quickly. You will be forcing water both directions in the drain, which will effectively loosen most clogs. Stick with it, plunging for around 30 seconds.
Step five: It’s best to alternate between plunging fast and slow to make the water flush better.
Step six: Keep enough water in the bowl so the plunger stays covered. Trying to force air through the toilet trap will not generate much pressure.
Step seven: Most of the time, this is all it takes to clear the clog. If you have repeated clogging, it might be a drainage performance issue and you may need to contact us.
Step eight: This should also work with toilets and external drains but if you need that extra help try using commercial drain cleaner which you can buy from the local supermarket.
Step nine: Read the label carefully to determine which cleaner is right for your particular type of blockage. For instance, some cleaners might work better in bathroom sinks, while others might work better for kitchen sinks.
Step ten: For most cleaners, you just need to simply pour the chemical down the drain and the blockage should be fixed. If you’re still struggling with a blockage, just give us a call.
If you still have an issue, call us on 0800 027 2057 and we’ll advise.